News

Check category
Homepage
/
Industry news
/
Four tips for using screw compressors that are both energy efficient and efficient

Four tips for using screw compressors that are both energy efficient and efficient

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2019-08-16 23:16
  • Views:

(Summary description)The working efficiency of the screw compressor is under full load operation. For example, when the rated pressure of the screw compressor is 8 kg, our own factory needs 6 kg of pressure. Then the size of the air compressor is just right. When the screw compressor is working at full load, the pressure can reach 6-6.5 kg. This has been loading for a long time. It can be said that it is more than any permanent magnet or variable frequency air compressor. It is necessary to save more electricity.

Four tips for using screw compressors that are both energy efficient and efficient

(Summary description)The working efficiency of the screw compressor is under full load operation. For example, when the rated pressure of the screw compressor is 8 kg, our own factory needs 6 kg of pressure. Then the size of the air compressor is just right. When the screw compressor is working at full load, the pressure can reach 6-6.5 kg. This has been loading for a long time. It can be said that it is more than any permanent magnet or variable frequency air compressor. It is necessary to save more electricity.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2019-08-16 23:16
  • Views:
Information
The working efficiency of the screw compressor is under full load operation. For example, when the rated pressure of the screw compressor is 8 kg, our own factory needs 6 kg of pressure. Then the size of the air compressor is just right. When the screw compressor is working at full load, the pressure can reach 6-6.5 kg. This has been loading for a long time. It can be said that it is more than any permanent magnet or variable frequency air compressor. It is necessary to save more electricity...
 
There are many ways to save energy in screw compressors. In order to improve the working efficiency of the air compressor, the design of the suction and exhaust piping of the screw compressor should be planned to minimize the leakage and pressure loss in the suction and exhaust pipeline, and a certain energy saving effect can be achieved.
 
If there are multiple screw compressors that need to be operated together, then the air compressor unit can be controlled by multiple units. By this method, the number of air compressors can be automatically adjusted according to the amount of air used, thus avoiding the air compressor. It is still a waste of energy when it is still running when necessary.
 
The screw compressor has a belt type and a direct connection type, and the driving method of the direct-coupled motor-driven screw air compressor can effectively reduce the mechanical transmission loss. There is also energy saving of the screw compressor by frequency conversion speed regulation. Variable frequency speed regulation can adjust the capacity, which can save about 30% to 40% energy consumption compared with the air intake throttle type. There is also a screw compressor that implements microcomputer control to reduce the range of loading and unloading. In the case of ensuring that the gas equipment can be used normally, the set value of the exhaust pressure is reduced as much as possible.

Scan the QR code to read on your phone

Previous: Misunderstood air compressor repair and maintenance
Next: None
Previous: Misunderstood air compressor repair and maintenance
Next: None

Copyright 2019 ©zjluodi.com/ All Rights Reserved

Copyright 2019 ©zjluodi.com

浙ICP备12000005号

网站建设： 中企动力  台州